Industrial Worm Gear Hand Winch | Industrial Spur Gear Hand Winch | Floor Mounted Spur Gear Winch |
MANUAL WINCH M SERIES
Manual safety crank(s) with centrifugal brake for lifting duties.
Manual disengaging clutch.
Manual band brakes.
Drum pressure roller.
Alternative drum dimensions / split drums / additional rope anchors / etc.
A range of floor mounted manual driven worm gear winches, developed for heavy duty lifting and pulling duties up to 2600 kg. For applications where no other power source than human power is available, for example; windlasses on small barges, lifting of ramp doors on small ferries or any other industrial heavy duty job. The customer can choose from a hand wheel or crank drive system. For the two small models M 500 and M 1000 the H versions are executed with two hand wheel or cranks in order to obtain a higher line speed. A special safety crank with integrated centrifugal brake is available as an option for lifting duties. Maximum human force to be applied is -max 60 Nm @ 60 rpm.
This range of standard winches can be easily adapted to the customers requirements, so if your specifications differ from the standard models as stated do not hesitate to send us your inquiry, we will offer you the required model accordingly.
Drawings can be obtained upon request.
Worm gear transmission up to 1000kg.Helical Bevel gearbox 1500 and 2000kg.
Heavy duty industrial construction of all parts.
Manual crank(s) or hand wheel(s),diameter 300 mm.
Steel drum (not grooved) with cable fixing point at flange.
Two drum supports.
Single layer 1 component conservation, colour BS 20 (Medium Blue).
Note: Also available with horizontal head mounting.